On 6th January 2025, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), successfully organized the Science, Technology, and Innovation (STI) 100³ Program Series 2 in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI). This program aimed to introduce practical technology elements to 107 Form 3 students and encourage them to explore Science, Technology, Engineering, and Mathematics (STEM) fields.

Key Program Activities:

• Popsicle Bridge
• HDL Programming

Program Facilitators:

1. Zulkifli Bin Md. Yusof (Scientist)
2. Ir. Ts. Dr. Sarah 'Atifah Binti Saruchi
3. Ts. Dr. Sheikh Muhammad Hafiz Fahami Bin Zainal
4. Ts. Dr. Mas Ayu Binti Hassan
5. Noraini Binti Hamzah
6. Ir. Ts. Dr. Noor Mazni Binti Ismail
7. Noorazleen Binti Mahidin

The program is expected to boost students' interest in science and technology while equipping them with basic skills in innovation. By engaging participants in hands-on activities, FTKPM and UMPSA continue their commitment to fostering creativity and technical competency among the younger generation.

Congratulations to all facilitators, UMPSA students, participants, and those involved in making this program a success. May this initiative continue to benefit and inspire future generations in STEM fields.

Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), through the Faculty of Manufacturing and Mechatronics Engineering Technology (FTKPM), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the AI Creativity Competition 2024: Art in the Era of Science, Technology, and Innovation (STI). The program aimed to introduce Artificial Intelligence (AI) technology to the younger generation while fostering an interest in technological innovation through practical and engaging activities.

The closing ceremony of the competition was officiated by Ts. Dr. Ahmad Rosli Abdul Manaf, Deputy Dean (Research and Postgraduate Studies) of FTKPM. Following the competition, the highlight of the AI Week FTKPM 2024, themed "Artificial Intelligence: Exploring the Future of Education and Careers," took place on December 17, 2024, at the UMPSA Language Center Hall.

Highlights of the Event:

• Panel Forum featuring:
  • Ts. Dr. Asrul Bin Adam (Moderator)
  • Dr. Mohd Azri Hizami Bin Rasid
  • Dr. Munira Binti Mohd Ali
  • Amir Fakarulisroq Bin Abdul Razak
• Poster and Video Presentations by students
• Awards Ceremony for competition winners

Additionally, two online practical sessions were conducted, providing participants with hands-on experience in applying AI technology to creative projects:

1. Video Editing using AI Tools by Mr. Muhammad Naufal Bin Samsudin
2. Poster Editing using AI Tools by Mr. Wan Hasbullah Bin Mohd Isa

The program also welcomed participation from 11 schools across Pahang, with over 250 students and teachers involved. Participating schools included:

• SMK Mat Kilau
• SMK Gudang Rasau
• SMK Tanjung Lumpur
• SMK Tengku Afzan
• SMK Sungai Soi
• SMK Tengku Abdullah
• SMK Seri Pekan
• SMK Ubai
• SMK Peramu Jaya
• SMK indera Shahbandar
• SBPI Kuantan

Winners:

• Poster Category: Arif Alauddin Bin Mohd Sabri (from SMK Peramu Jaya)
• Video Category: Hendianto Mohammad Farid (from Faculty of Computing UMPSA)

These events successfully provided participants with valuable insights and experiences regarding the potential of AI technology. UMPSA and FTKPM remain committed to being leaders in technological innovation, especially among the younger generation.

10 December 2024 | The first series of the Science, Technology, and Innovation (STI) 100³ Program, sponsored by the Ministry of Science, Technology, and Innovation (MOSTI), successfully took place at SMK Tengku Afzan, Kuantan. This program saw the participation of 93 Form 4 students, focusing on building and launching rockets as a way to inspire interest in STEM.

Led by Ts. Dr. Asrul Bin Adam and supported by FTKPM lecturers, including Dr. Zubair Khalil, Ts. Dr. Nafrizuan Mat Yahya, Ts. Dr. Muhammed Nafis Osman Zahid, and En. Zulkifli Md Yusof, the program offered students the opportunity to engage in practical activities. Through these sessions, they not only learned how to design and launch rockets but also honed essential skills such as data collection, analysis, and decision-making.

The event was graced by the presence of the school principal, Puan Hajah Rosita, along with teachers and Hj. Fakhrul Anuar Zulkawi, a member of the Kuantan City Council, who extended their support to the initiative.

The STI 100³ program is designed to provide significant benefits to students by exposing them to hands-on STEM activities while fostering a deep interest in technological innovation.

May this program continue to inspire the younger generation to explore STEM and innovate for a brighter future.

On December 4, 2024, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the Science Technology Innovation (STI) 100³ Program at SMK Seri Pekan, Pekan. The program engaged 100 students, divided into 20 groups, aiming to ignite their interest in STEM (Science, Technology, Engineering, and Mathematics) through interactive activities.

Highlights of the Program:

• Rocket Launcher 
• Arduino Programming 

Led by En Zulkifli Bin Md Yusof and supported by a dedicated team of facilitators from FTKPM, including esteemed lecturers:

• Dr. Zubair Bin Khalil
• Ts. Dr. Fazilah Binti Abdul Aziz
• Ts. Dr. Nafrizuan Bin Mat Yahya
• Ir. Ts. Dr. Noor Mazni Binti Ismail
• Ts. Dr. Asrul Bin Adam
• Ts. Dr. Ahmad Shahrizan Bin Abdul Ghani

The program also featured a special briefing on educational opportunities at FTKPM, aimed at inspiring students to further explore STEM fields.

This initiative reflects FTKPM's commitment to fostering innovation and creativity among young learners, equipping them with practical knowledge and skills in science and technology. Congratulations to all facilitators and participants for the success of this program! May the knowledge shared continue to inspire students to excel in technology and innovation.

27 November 2024 – The Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the Program Sains Teknologi Inovasi 100³ at SMK Tengku Panglima Perang Tengku Muhammad. The program attracted the participation of 267 students and aimed to foster interest in Science, Technology, Engineering, and Mathematics (STEM) through interactive activities such as Rocket Launcher, Popsicle Bridge Stick, Shock Absorber, Arduino Smart Robot, Robot Programming, and Additive Design and Technology.

This program was led by Dr. Muhammad Amirul bin Abdullah, a UMPSA scientist appointed by MOSTI, and supported by a team of 16 facilitators comprising FTKPM lecturers. Designed to provide hands-on exposure to technological innovation, the program encouraged creativity and deepened students’ interest in STEM fields.

The closing ceremony was officiated by YBrs. Encik Abdullah bin Daud, Secretary of the STI Culture and Services Division, MOSTI, and attended by Puan Juwita binti Jamaludin, the Principal of SMK Tengku Panglima Perang Tengku Muhammad. During the ceremony, MOSTI presented appointment letters to six UMPSA scientists, marking their commitment to realizing the vision of Program STI 100³.

FTKPM hopes this initiative will raise students’ awareness of career opportunities in STEM while strengthening ties between higher education institutions and schools, preparing future generations to lead in innovation and technology.

On 14th November 2024, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), successfully organized the Science, Technology, and Innovation 100^3 Program at SMK (P) Methodist, Kuantan. This initiative, in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), aimed to inspire 150 Form Three students to delve deeper into the fields of Science, Technology, Engineering, and Mathematics (STEM) through interactive, hands-on activities.

The program featured a range of engaging modules designed to provide students with a deeper understanding of STEM, including:

• Rocket Launcher
• Popsicle Bridge Stick
• Arduino Smart Robot
• Robot Coding
• Robot Soccer

The program was led by Ts. Dr. Radhiyah Binti Abd Aziz, a scientist from UMPSA appointed by MOSTI, with the support of an exceptional team of facilitators who made the event a success. The facilitators included:

• Ts. Dr. Radhiyah Binti Abd Aziz
• Ts. Dr. Muhammed Nafis Bin Osman Zahid
• Dr. Zubair Bin Khalil
• Cik Nur Fatihah Munira Binti Ab Kadir @ Sahibullah
• Dr. Musfirah Binti Abdul Hadi
• Dr. Ahmad Syakirin Bin Ismail @ Rosdi
• Puan Suraya Sulaiman
• Ir. Ts. Dr. Sarah 'Atifah
• Ir. Ts. Dr. Noor Mazni Binti Ismail
• Puan Hanum Binti Abdul Halim
• Puan Nor Imrah Binti Yusoff
• Dr. Munira Binti Mohd Ali
• Ts. Dr. Fazilah Binti Abdul Aziz
• Puan Siti Aishah Binti Rusdan
• Ir. Dr. Noraini Binti Mohd Razali

This program serves as a vital platform to introduce students to technological innovations while fostering stronger collaboration between UMPSA and local schools. The activities are specifically designed by FTKPM lecturers to give students practical exposure to STEM concepts, enhancing their creativity and interest in these critical fields.

FTKPM hopes this initiative will ignite students' passion for STEM, inspiring them to pursue careers in technology and engineering. By equipping students with foundational knowledge and skills, the program supports the goal of nurturing a tech-savvy generation ready to meet future industry demands.

FTKPM expresses its gratitude to MOSTI, SMK (P) Methodist, and all facilitators for their invaluable contributions in making this program a success.