On 9th January 2025, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the STI 100³ Program at SMK Sultan Ahmad Shah, Tanah Rata. The program welcomed the participation of about 200 students divided into 40 groups.

This initiative aimed to expose students to elements of technology and engineering through engaging and interactive hands-on activities.

Highlights of the Program Modules: Rocket Launcher, Popsicle Bridge Stick, Arduino Smart Robot, Shock Absorber, Robot Coding and 3D Modelling

The program was led by Wan Hasbullah Bin Mohd Isa and supported by 17 FTKPM staff members, including academic and administrative personnel who volunteered as facilitators. Students had the opportunity to reflect on their learning experiences during a dedicated reflection session, followed by a faculty briefing. The program concluded with an official closing ceremony and the presentation of awards to participants.

This program not only aimed to foster students' interest in STEM but also provided a platform for them to develop foundational skills in technological innovation. FTKPM takes pride in the dedication of its facilitators and the strong collaboration among all parties involved in the success of this event.

Congratulations to all participants, facilitators, and organizers for the successful execution of this program. May such initiatives continue to inspire and benefit the younger generation in exploring the world of technology.

On January 8, 2025, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the STI 100³ Program at SMK Bukit Damar, Lanchang. This program engaged about 200 students, aiming to introduce them to technology and engineering elements through interactive and hands-on activities.

Exciting Program Modules were:

• Rocket Launcher
• Popsicle Bridge Stick
• Arduino Smart Robot
• Shock Absorber
• Robot Coding
• 3D Modelling

The program was led by Wan Hasbullah Bin Mohd Isa, supported by 17 FTKPM staff members, including academicians and administrative staff who volunteered as facilitators. The program's agenda included engaging module sessions, a reflection segment, a faculty briefing, and concluded with a closing ceremony and award presentation for participants.

Through this initiative, students were exposed to the fascinating world of STEM, helping to foster their interest in science and technology while building essential skills in innovation. FTKPM takes great pride in the commitment shown by the facilitators and the close collaboration of all involved in making this program a success.

Congratulations to all participants, facilitators, and organizers for their dedication to ensuring the success of this event. It is hoped that such initiatives will continue to benefit and inspire future generations to explore the ever-evolving world of technology.

7th January 2025 | The second series of the STI 100³ MOSTI Program was successfully held at SMK Tengku Afzan, engaging 97 enthusiastic Form 2 students eager to explore new knowledge.

Led by Ts. Dr. Asrul Bin Adam, the program was supported by three dedicated lecturers from the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM):

• Ts. Dr. Muhammed Nafis Bin Osman
• Dr. Mohamad Farid Bin Mohamad Syarif
• Dr. Ismayuzri Bin Ishak

The program featured two exciting modules that captured the students' interest:

1. Arduino Robot – Students learned to build, wire, and program robots.
2. 3D Modelling – A creative activity where students designed products using 3D technology.

Combining theoretical knowledge and hands-on application, the program provided a meaningful and enjoyable way for students to explore the world of manufacturing and mechatronic engineering.

This initiative aims to inspire the younger generation to innovate, enhance their skills, and take bold steps into the world of STEM.

On 6th January 2025, the Faculty of Manufacturing and Mechatronic Engineering Technology (FTKPM), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), successfully organized the Science, Technology, and Innovation (STI) 100³ Program Series 2 in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI). This program aimed to introduce practical technology elements to 107 Form 3 students and encourage them to explore Science, Technology, Engineering, and Mathematics (STEM) fields.

Key Program Activities:

• Popsicle Bridge
• HDL Programming

Program Facilitators:

1. Zulkifli Bin Md. Yusof (Scientist)
2. Ir. Ts. Dr. Sarah 'Atifah Binti Saruchi
3. Ts. Dr. Sheikh Muhammad Hafiz Fahami Bin Zainal
4. Ts. Dr. Mas Ayu Binti Hassan
5. Noraini Binti Hamzah
6. Ir. Ts. Dr. Noor Mazni Binti Ismail
7. Noorazleen Binti Mahidin

The program is expected to boost students' interest in science and technology while equipping them with basic skills in innovation. By engaging participants in hands-on activities, FTKPM and UMPSA continue their commitment to fostering creativity and technical competency among the younger generation.

Congratulations to all facilitators, UMPSA students, participants, and those involved in making this program a success. May this initiative continue to benefit and inspire future generations in STEM fields.

Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), through the Faculty of Manufacturing and Mechatronics Engineering Technology (FTKPM), in collaboration with the Ministry of Science, Technology, and Innovation (MOSTI), successfully organized the AI Creativity Competition 2024: Art in the Era of Science, Technology, and Innovation (STI). The program aimed to introduce Artificial Intelligence (AI) technology to the younger generation while fostering an interest in technological innovation through practical and engaging activities.

The closing ceremony of the competition was officiated by Ts. Dr. Ahmad Rosli Abdul Manaf, Deputy Dean (Research and Postgraduate Studies) of FTKPM. Following the competition, the highlight of the AI Week FTKPM 2024, themed "Artificial Intelligence: Exploring the Future of Education and Careers," took place on December 17, 2024, at the UMPSA Language Center Hall.

Highlights of the Event:

• Panel Forum featuring:
  • Ts. Dr. Asrul Bin Adam (Moderator)
  • Dr. Mohd Azri Hizami Bin Rasid
  • Dr. Munira Binti Mohd Ali
  • Amir Fakarulisroq Bin Abdul Razak
• Poster and Video Presentations by students
• Awards Ceremony for competition winners

Additionally, two online practical sessions were conducted, providing participants with hands-on experience in applying AI technology to creative projects:

1. Video Editing using AI Tools by Mr. Muhammad Naufal Bin Samsudin
2. Poster Editing using AI Tools by Mr. Wan Hasbullah Bin Mohd Isa

The program also welcomed participation from 11 schools across Pahang, with over 250 students and teachers involved. Participating schools included:

• SMK Mat Kilau
• SMK Gudang Rasau
• SMK Tanjung Lumpur
• SMK Tengku Afzan
• SMK Sungai Soi
• SMK Tengku Abdullah
• SMK Seri Pekan
• SMK Ubai
• SMK Peramu Jaya
• SMK indera Shahbandar
• SBPI Kuantan

Winners:

• Poster Category: Arif Alauddin Bin Mohd Sabri (from SMK Peramu Jaya)
• Video Category: Hendianto Mohammad Farid (from Faculty of Computing UMPSA)

These events successfully provided participants with valuable insights and experiences regarding the potential of AI technology. UMPSA and FTKPM remain committed to being leaders in technological innovation, especially among the younger generation.

10 December 2024 | The first series of the Science, Technology, and Innovation (STI) 100³ Program, sponsored by the Ministry of Science, Technology, and Innovation (MOSTI), successfully took place at SMK Tengku Afzan, Kuantan. This program saw the participation of 93 Form 4 students, focusing on building and launching rockets as a way to inspire interest in STEM.

Led by Ts. Dr. Asrul Bin Adam and supported by FTKPM lecturers, including Dr. Zubair Khalil, Ts. Dr. Nafrizuan Mat Yahya, Ts. Dr. Muhammed Nafis Osman Zahid, and En. Zulkifli Md Yusof, the program offered students the opportunity to engage in practical activities. Through these sessions, they not only learned how to design and launch rockets but also honed essential skills such as data collection, analysis, and decision-making.

The event was graced by the presence of the school principal, Puan Hajah Rosita, along with teachers and Hj. Fakhrul Anuar Zulkawi, a member of the Kuantan City Council, who extended their support to the initiative.

The STI 100³ program is designed to provide significant benefits to students by exposing them to hands-on STEM activities while fostering a deep interest in technological innovation.

May this program continue to inspire the younger generation to explore STEM and innovate for a brighter future.